Spare parts large

Aerzen Oil
Original Aerzen rotary lobe blower Oil – the correct high performance lubricant is vital

Öle

Oil is not always ”Oil“
With decades of experience we know that 72% of all bearing problems are directly related to improper lubrication either due to dirty oil, rapid ageing, or unsuitable quality for use in high speed machines.

Be pro-active, ensure you use a lubricant that is designed for the high mechanical loading, varying pressure, high temperatures, and exposure to oxygen and moisture in your machine. A reduction in lubrication film will be prevented if the correct lubricant is used and so prevent premature failure of the blower

Well oiled is half the battle,
With the range of Aerzen Original Rotary lobe blower Oil you have the total solution in your hands for all operating conditions. These lubricants are up-to-date High Performance oils, selected by Aerzen and tested over many millions of operating machine hours to ensure their reliability.

A high temperature and resistant to oxidation, a consistent viscosity / temperature behaviour, and an excellent low temperature pourability, ensure full lubrication at all stages of operation and thus extend the life span of your blowers and compressors. A balanced selection of additives ensures corrosion and ageing protection of oil and the machines.

Extend the lifespan of your machines and at the same time make use of our special offer!!
So that you can be sure of using lubricants tailored to your specific equipment operating requirements we offer the following range of Special Oils

Type Application Ambient
conditions
Blower / Compressor
Discharge temperature
Operation mode Lifespan
Special Oil GA
Part no.: 160755002
All Rotary Lobe
Blower Type GM
With no restrictions on ambient conditions Up to 120 °C one/two shift
and intermittent
operation
2000 - 4000 OH
Special Oil GD
Part no.: 177968000
All Rotary Lobe
Blower Type GM
+10 °C to +60 °C Up to 140 °C 24/7 operation Up to 8000 BH
Special Oil VD
Part no.: 177967000
All Screw compressors Type VM +10 °C to +60 °C Up to 250 °C All operating modes 8000 - 12000 OH
Delta Lube 06 Part no.: 178132000 Delta Hybrid With no restrictions on ambient conditions Delta Hybrid up to 180 °C All operating modes Up to 16000 OH
Delta Screw G5 with belt drive Delta Screw G5 up to 280 °C

Your advantages:

  • All Aerzen Blower and Compressors oils are available for shipment within 24 hours of order receipt
  • Our team will be glad to assist you in the selection of the correct oil for your application.

Your advantages with Delta Lube 06:

  • No oil change after 500 OH necessary
  • Extended oil change interval up to 16000 OH

In respect of the miscibility with other lubricants, lubricants for use in the food industry and limitations of use please contact us, or refer to the Aerzen O&M manual supplied with the equipment.

Disclaimers: The above oil recommendations do not apply to vacuum boosters. Shipping restrictions may apply to different countries or freight carriers.

Inquiries and orders

Downloads
Original Aerzen rotary lobe blower oil